The short answer
You likely need a new furnace when repairs keep coming back, the heat exchanger is cracked, or the system can't keep your home comfortable. ArcticFlow inspects your furnace, ducts and venting, sizes a system for your home, and explains your repair, gas furnace and heat pump options before you decide.
Furnaces in the Santa Clara Valley work less than furnaces in colder parts of the country. Our mild, damp winters still bring chilly mornings and cold nights, though, and that's when you want heat you can count on. When an older furnace starts failing, the choice is bigger than which model to buy. You need to know whether a repair still makes sense, what size system your home needs, and how Bay Area air quality rules may affect your options. This page explains how ArcticFlow handles furnace installation for homeowners in Santa Clara, San Jose, Sunnyvale, Cupertino and nearby cities, so you know what to expect.
Signs It May Be Time for a New Furnace
Most furnaces give some warning before they quit. One symptom doesn't always mean you need a replacement. Several at once, especially on an older unit, are worth a closer look.
Heating season here is short, so a furnace can run for years with little attention and then struggle in the first cold week. If any of these sound familiar, schedule an inspection before you're left without heat.
- Some rooms stay colder than others, or the house never reaches the thermostat setting
- The furnace turns on and off often, or runs much longer than it used to
- You keep repairing the same unit, especially ignition, blower or control board problems
- New noises such as banging, squealing, rattling or a loud boom when the burners light
- The burner flame looks yellow or flickers instead of burning a steady blue
- Rust, cracks or soot around the cabinet, burners or vent connection
- More dust, drier air or stale smells when the heat runs
- Heating bills going up even though you use the system the same way
- Your carbon monoxide alarm goes off. Leave the house and call 911 or your gas utility before anything else.
What We Check Before Recommending Anything
We base our recommendation on your house, not just the label on the old unit. Many older valley homes have furnaces that were sized by rule of thumb decades ago. Since then, the house may have been remodeled, insulated or fitted with new windows, so the right size today may be different.
During an inspection, we look at the furnace and at everything it depends on:
We also ask how the house feels to live in. Which rooms stay cold? Does the upstairs get too warm? Do you have central air, or are you thinking about adding it? Your answers shape the recommendation as much as the equipment does.
- Heat exchanger condition, burners, ignition and flame sensor
- Venting and flue connections, including draft and clearances
- Gas supply line, shutoff valve and connections
- Blower motor, filter setup and airflow through the system
- Ductwork: leaks, crushed runs and loose sections in the attic or crawlspace
- Thermostat type and wiring
- Electrical service, which matters if you're considering a heat pump
- Where the unit sits (closet, garage, attic or crawlspace) and how much working room there is
Repair or Replace: Your Options
Not every problem calls for a new furnace. A failed igniter, flame sensor, pressure switch or blower capacitor is usually worth repairing, even on an older unit. When a repair is the sensible choice, we'll tell you.
Replacement makes more sense when the heat exchanger is cracked, when major parts fail on a unit near the end of its life, or when you're paying for repairs every season. At that point, homeowners here usually choose between these options:
Air quality rules are part of this decision. Under Bay Area Air District rules, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. The rules don't require you to replace a furnace that still works. They apply only when an existing furnace fails or is replaced.
If you're replacing your furnace now, think about whether a gas furnace or a heat pump fits your long-term plans. Our winters are mild, which suits heat pumps well, and a heat pump also gives you cooling for hot summer days in the inland and southern parts of the valley. We'll explain the tradeoffs either way.
- A new gas furnace, often the simplest swap when the ducts and venting are in good shape
- A heat pump, which heats and cools with one system and takes the furnace's place
- A dual-fuel system, which pairs a heat pump with a gas furnace as backup
- A furnace replacement done together with adding or replacing central air
What Affects the Cost of a Furnace Installation
We don't quote a price until we've seen your house. Two furnace installations can look alike on paper and turn out very differently in practice. These are the main cost factors:
Incentives can also affect the final cost. The federal Energy Efficient Home Improvement Credit covered qualifying heat pumps placed in service before December 31, 2025, so it isn't available for new installations now. Bay Area homeowners can check BayREN and their local clean energy provider for current heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before we include it in a quote.
- System type: gas furnace, heat pump or dual-fuel
- Efficiency level and how the system runs: single-stage, two-stage or variable-speed
- Equipment size, based on a load calculation for your home
- Location and access, since attic and crawlspace installs take more labor than garage or closet installs
- Duct repairs, sealing or changes
- Venting changes, especially when you move to a high-efficiency furnace that vents differently
- Electrical upgrades, which sometimes come up with heat pumps
- Permits and inspections required by your city
- Whether you're replacing your air conditioning at the same time
How a Furnace Installation Visit Works
A visit starts with listening. We ask what's happening with your heat, how old the system is, and what you'd like it to do better. From there, the process looks like this:
If your heat goes out on a cold night, let us know when you contact us. We'll check whether a short-term repair can keep you warm while you decide on a replacement.
- We inspect the furnace, venting, ducts, thermostat and electrical service
- We size the new system for your home instead of copying the old unit's size
- We explain what we found in plain terms and show you any problem areas
- We give you written options, such as a repair, a gas furnace or a heat pump, with the tradeoffs of each
- Once you choose, we schedule the installation and handle permits where required
- On installation day, we protect floors and work areas, remove the old unit, install and connect the new system, and test its operation, airflow and safety controls
- Before we leave, we show you how to use the thermostat, change the filter and handle basic upkeep
